The mini nylon loose tube cable series combines ultra-low attenuation, state-of-the-art installation performance and ultra compact size. Reduced diameter loose tube combines the same excellent performance of standard nylon loose tube, in a robust and compact form. Its reduced size is a benefit to both asset owners and installers, facilitating faster installation, easier handling and less duct congestion.

The cables are based on a dry water-blocked concentric core, slim loose tube design with up to 24 tubes per cable. The cables have one or two layers of protective SZ laid tubes made of a robust PBT compound where each tube has 12 fibres (excluding 6f).

The tubes are jacketed by a black HDPE and blue nylon sheath, in compliance with AS 1049.
The design facilitates easy fibre preparation and mid-span access.

OSA Stock the following Mini Loose Tube Cable variants

OSA – 6 Core S/M Mini Loose Tube Nylon Jacket Fibre Cable
OSA – 12 Core S/M Mini Loose Tube Nylon Jacket Fibre Cable
OSA – 24 Core S/M Mini Loose Tube Nylon Jacket Fibre Cable
OSA – 48 Core S/M Mini Loose Tube Nylon Jacket Fibre Cable
OSA – 72 Core S/M Mini Loose Tube Nylon Jacket Fibre Cable
OSA – 96 Core S/M Mini Loose Tube Nylon Jacket Fibre Cable
OSA – 144 Core S/M Mini Loose Tube Nylon Jacket Fibre Cable
OSA – 288 Core S/M Mini Loose Tube Nylon Jacket Fibre Cable

OSA – 6 Core OM3 Mini Loose Tube Nylon Jacket Fibre Cable
OSA – 12 Core OM3 Mini Loose Tube Nylon Jacket Fibre Cable
OSA – 24 Core OM3 Mini Loose Tube Nylon Jacket Fibre Cable

OSA – 6 Core OM4 Mini Loose Tube Nylon Jacket Fibre Cable
OSA – 12 Core OM4 Mini Loose Tube Nylon Jacket Fibre Cable
OSA – 24 Core OM4 Mini Loose Tube Nylon Jacket Fibre Cable

The nylon loose tube cable series combines robust design, ultra-low attenuation and excellent installation performance. Nylon loose tube is designed for use in termite prone areas as the hard outer nylon jacket provides protection against termites and insects. The SZ stranded loose tubes provide excellent performance, even under significant tensile loads.

The cables are based on a dry water-blocked concentric core, loose tube design with up to 24 tubes per cable. The cables have one or two layers of protective SZ laid tubes made of a robust PBT compound where each tube has 12 fibres (excluding 6f). The tubes are jacketed by a black HDPE and blue nylon sheath in compliance with AS 1049. The design facilitates easy fibre preparation and mid-span access.

OSA Stock the following Loose Tube Cable variants

OSA – 6 Core S/M Loose Tube Nylon Jacket Fibre Cable
OSA – 12 Core S/M Loose Tube Nylon Jacket Fibre Cable
OSA – 24 Core S/M Loose Tube Nylon Jacket Fibre Cable
OSA – 48 Core S/M Loose Tube Nylon Jacket Fibre Cable
OSA – 72 Core S/M Loose Tube Nylon Jacket Fibre Cable
OSA – 96 Core S/M Loose Tube Nylon Jacket Fibre Cable
OSA – 144 Core S/M Loose Tube Nylon Jacket Fibre Cable

OSA – 6 Core OM1 Loose Tube Nylon Jacket Fibre Cable
OSA – 12 Core OM1 Loose Tube Nylon Jacket Fibre Cable
OSA – 24 Core OM1 Loose Tube Nylon Jacket Fibre Cable

OSA – 6 Core OM3 Loose Tube Nylon Jacket Fibre Cable
OSA – 12 Core OM3 Loose Tube Nylon Jacket Fibre Cable
OSA – 24 Core OM3 Loose Tube Nylon Jacket Fibre Cable

OSA – 6 Core OM4 Loose Tube Nylon Jacket Fibre Cable
OSA – 12 Core OM4 Loose Tube Nylon Jacket Fibre Cable
OSA – 24 Core OM4 Loose Tube Nylon Jacket Fibre Cable

The OSA Under Vehicle Inspection Camera is designed to allow easy and simple visualisation of the undercarriage of all vehicle types due to the design meeting the Australian standards for speed bumps.

It is available as a single section as shown below for vehicles to drive over. Additional blank sections can be added to turn the OSA-UVIC into a standard full width speed bump.

The CoreLink EHD Enhanced High Density optical fibre system is expanded with a range of cassette loaded passive components. Utilising the same existing range of CoreLink EHD enclosures, these cassette loaded passive components integrate seamlessly into any optical fibre network.

Breakout series cable is ideal for installations requiring an extremely rugged and reliable cable design where maximum mechanical and environmental protection are necessary.

Distribution series cable is ideal for installations requiring a flexible, lightweight and reliable cable design where excellent mechanical and environmental protection remain necessary.

The balance between compact size and rugged construction make distribution the preferred cable for many preterminated cable assemblies or site terminated fibre networks.

Micro cable and double jacket/subgroup micro cable is ideal for indoor installations requiring a flexible, lightweight and reliable cable design where high fibre counts and small size is critical.

The high fibre counts and low cable diameter make micro cable the preferred cable for most enterprise level networks including MTP® and MPO and other preterminated networks. The compact construction limits cable congestion in populous networks.
Available in a variety of fibre counts in single jacket or double jacket/subgrouped construction.

The OSA sliding fibre storage tray offers a simple and convenient patch lead slack storage option. Perfectly 19” rackmounting, the storage tray integrates seamlessly with the OSA line of fibre management solutions.

OSA series of Fire Resistant cable is ideal for installations requiring a cable that can withstand damage from fire or flame for a period of time. This cable allows for systems to remain operational for a limited time where traditional cables will not.
Perfect for critical systems, where time is required for system shutdown or data backup to take place, or for signaling & safety purposes.