Molex PowerCat 6 U/UTP Patch Cordsare key components of PowerCat 6 U/UTP End-to-End Solution and are designed to support data networks for 10/100BASE-T and 1000BASE-T applications.

The patch cable is made from high quality four pair 24 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are preterminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

The PowerCat 6 MOD-Clip DataGate jack is designed to maintain clean secure connections. The RJ-45 jack features a patented ‘spring-loaded shutter’ which protects it from dust and contaminants as well as provides tactile feedback – the spring-loaded shutter pops out an improperly seated patch cord – all with single-handed plug-in and removal.

The MOD-Clip DataGate jacks utilise patented IDC V-shaped contacts that flex not fatigue when terminated and is uniquely designed to allow for rear and side entry cable termination. The provision of side entry termination ensures bend radius is maintained in installations where there is limited space – optimising the performance of your Category 6 solution.

Molex’s Category 6A field terminable plug is designed to support 10 Gigabit networks and can be easily terminated using parallel jaw pliers.  The IDC is designed to accommodate different diameter conductors from 22 AWG-26 AWG Solid Wire. The Field Terminable Plug meets TIA-568-C.2 Category 6A component performance. Cat 5e/6 and 6A Direct Attach link and channels.

Ideal for use to provide high-bandwidth wireless access points and other IP-enabled devices such as: Surveillance cameras and infrastructure monitoring. A field modular plug that is simple to terminate and meets Cat 6A performance requirements is also ideal in data centres, premise network applications, premise automation such as lighting, HVAC and other environmental sensor applications.

PowerCat 6 Patch Panels are the premier Molex patch panel product line. A key product used in both Category 6 link and channel gigabit ethernet applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter and can be colour coded to match jack outlets. Offering both front and rear labelling options, the patch panel is constructed of cold-rolled steel for additional strength and durability.

Molex Premise Networks PowerCat 6 (C6) 4 Pair U/UTP cable has been designed to support high speed data transmission systems such as Gigabit Ethernet. The cable is part of the PowerCat 6 range of products that are designed to comply with the Category 6 specification. We recommend that the full range of PowerCat 6 products are used in a system to maximise cabling performance, providing extended frequency response and enhanced bandwidth.

The cable consists of a number of 900m tight buffered optical fibres reinforced with aramid yarns and surrounded in a flame retardent LSZH Sheath.

The cable consists of a number of 900m tight buffered optical fibres reinforced with aramid yarns and surrounded in a flame retardent LSZH sheath.

Graded Index 50/125µm fibre is proven to satisfy Gigabit Ethernet applications. It will support link lengths greater than 1000 metres at both 850nm and 1300nm in local area network applications (LAN) and transmission rates of up to 10Gbit/s over a distance of 300 metres at 850nm.

The cable consists of a number of 900m tight buffered optical fibres reinforced with aramid yarns and surrounded in a flame retardent LSZH sheath.

The cable consists of a number of 900m tight buffered optical fibres reinforced with aramid yarns and surrounded in a flame retardent LSZH Sheath.