The tight protected duct assemblies consist of a number of microducts with an inner low friction surface that enables installation of micro cables or nano cables. The duct assemblies are bundled with a single HDPE or PP sheath. The design makes the duct assemblies especially suitable for installation into narrow existing ducts, conduits or pipes occupied with cables or other obstacles. The round structure enables easy splicing and sealing at joints and branch locations. The microducts are optimized for best performance in combination with the Hexatronic Viper Micro Cable and Hexatronic Raptor Nano Cables.

The tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of air blown fibers. The duct assemblies are bundled with a single HDPE or PP sheath depending on configuration. The design makes the duct assemblies especially suitable for installation into narrow existing ducts, conduit or pipes occupied with cables or other obstacles. The round structure enables easy splicing and sealing at joints and branch locations.

The tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of air blown fibers. The duct assemblies are bundled with a single HDPE or PP sheath depending on configuration. The design makes the duct assemblies especially suitable for installation into narrow existing ducts, conduit or pipes occupied with cables or
other obstacles. The round structure enables easy splicing and sealing at joints and branch locations.

The indoor tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of air-blown fibers. These microducts are highly flame retardant and therefore suitable for indoor use.

These single way duct assemblies consist of a microduct with an inner low friction, antistatic surface that enables installation of air blown fibers or nano cables. The round structure enables easy splicing and sealing at joints and branch locations. Available with a preinstalled tracer wire under the sheath on selected variants. The integrated tracer wire saves time and installation cost since an additional wire for tracing is not required.

The tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of micro cables, nano cables or air blown fibers. The duct assemblies are bundled with a dual sheath in this configuration. The design makes the ducts suitable for installation directly into the ground. The round structure enables easy splicing and sealing at joints and branch locations.

The tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of micro cables or nano cables. The duct assemblies are bundled with a single or dual sheath in this configuration. The design makes the ducts suitable for installation directly into the ground. The round structure enables easy splicing and sealing at joints and branch locations.

The tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of air blown fibers or nano cables. The duct assemblies are bundled with a dual sheath in this configuration. The design makes the ducts suitable for installation directly into the ground. The round structure enables easy splicing and sealing at joints and branch locations.

The tight protected duct assemblies consist of a number of microducts with an inner low friction, antistatic surface that enables installation of micro cables, nano cables or air blown fibers. The thick inner wall of the microducts allow for installation directly into the ground without the need for additional protection.