• Maintain top optical performance and minimise test equipment downtime
• Unprecedented versatility
• Future-proof test capabilities
• Field efficiency

Did you know?

Was your OTDR connector damaged when connecting a UPC cable to the APC port on your device? This no longer needs to cause downtime by returning the device for repair. Thanks to EXFO’s Swap-Out connectors, you can now check connector health instantly and replace your connector within seconds if needed–directly from the field!

• Full-featured MPO-12 power meter and light source with the industry’s fastest test speeds
• Large, hybrid contactless connector: PXM accommodates APC and UPC connectors to support multimode and singlemode link testing
• Large core detector allows the PXM to give precise measurements with low uncertainty
• Generate reports with FastReporter: PXM power meter measurements for power or loss can be processed directly by FastReporterSmartphone-grade touchscreen: PXM and LXM have integrated high‑quality capacitive colour touchscreens designed to be visible in full sun or dark areas, from any angle
• Leading FasTesT™ performance: test 12 fibres at two wavelengths in just 1 second4-inch colour touchscreen
• Native MPO-12 connector on devices
• Dual wavelength on light sourceInsertion loss measurement
• Polarity type validationIn-line visual fault locator (VFL) for fibre tracing on LXM
• Comprehensive results combined on one page.

SecuriTEST IP is an installation and troubleshooting tester for digital/IP, HD coax and analogue CCTV camera systems. With a single tester that can power, configure and document, SecuriTEST IP increases productivity from start to finish.

The NaviTEK IE is a tester for commissioning, preventative maintenance and troubleshooting of PROFINET Industrial Ethernet networks as well as standard Ethernet IP networks.

Designed to simplify the process, the NaviTEK IE identifies network nodes and configuration without requiring a PC and speciality software. An easy to understand system health check pinpoints potential issues before they become network failures. Automatically discover cable, network or device configuration/faults with the touch of a button.

LanXPLORER Pro is a tester for analysing and diagnosing problems in networks, cabling and Ethernet devices using copper, fibre and Wi-Fi interfaces.

OSA/TREND Navitek provides the essential Network tool for technicians to verify, identify and prove port connection network speeds – create reports Confirm Network Speed 10/100/1000Mbits

CDP/LLD Network port ID, MAC, IP, VLAN,

• Network utilisation graph
• Fibre dB Health check Green/Amber/Red
• Wire map and Cable tracing with distance to fault (TDR)
• Create PDF / CSV reports and transfer them Via free mobile App

TRE-R151006 Navitek Plus Copper & Fibre Network Verifier

TRE-R151005 Navitek Plus Copper Network Verifier

Bundle : TRE-NT-TEK : includes 12 Active Remotes, Amplifier Probe, 3 year warranty.

If you install, maintain or troubleshoot data cabling and Ethernet networks, SignalTEK NT allows you to prove the performance up to Gigabit Ethernet transmission rates.

Solve the key PoE problems: discovered from field research

Test PoE to international standards regardless of length: Report proof of operation

*Pass / Fail to IEEE PoE standards – ensure end devices are Compatible with new PoE classes

*Load test live links to prove available PoE power regardless of length

*Create reports instantly as proof of the operation or snapshot a discovered fault

Wire Map: Detect the length and distance to the fault
Power at the source: Test the feed at the source
Type of power source: Switch or mid-span – injector are they compatible
Pass/Fail to the standards: Hi and low power testing

Power at the end device: Regardless of length

TRE-R158006: PoE Pro with Bluetooth reporting
TRE-R180001: Amplifier probe with LED torch
TRE-R158050: Wire map and trace cables 12 RJ45 remotes enable fast wire mapping and cable ID tracing
Bundle option: TRE POE PRO KIT (includes PoE Pro, tone probe, 24 port identifiers, 3-year extended warranty)

FiberTEK IV adapters are used with LanTEK IV for fast and simple certification of high bandwidth single-mode and multimode fibre optic cabling including support for encircled flux testing (optional).

To pinpoint fibre cabling faults every FiberTEK IV adapter includes a built-in visible light source to help you visually pinpoint faults and locate fibre ports.