For connecting earth straps, earthing braids to the vertical and horizontal enclosure section. The connection bracket is connected to the enclosure frame with 2 screws and is securely contacted. Earth connection is carried out via the threaded bolt M8 x 20 mm.

To DIN EN 60 950/VDE 0805, Ø 4 mm². For system-compatible earthing of all enclosure parts on the enclosure frame. The earth conductors are pre-assembled ready for connection with connectors and cut to the correct length.

For star earthing. With the pre-assembled earth conductors on a potential equalisation rail, star potential equalisation is easily integrated into network enclosures.

For star earthing. With the pre-assembled earth conductors on a potential equalisation rail, star potential equalisation is easily integrated into network enclosures.

Dangerously high potential differences can occur during maintenance or conversion work on the enclosure. To protect sensitive electronic components, this standardised connection point (push-button) provides potential equalisation. The connection point is directly conductively connected to the enclosure frame via two screws.

For system-compatible expansion of the star earthing on the vertical potential equalisation rail.

The earthing connector is used for simple potential equalisation on an 8 mm earthing bolt, or in conjunction with central earthing point 7829.200. Up to five flat-pin connectors (6.3 mm) may be contacted on one earthing point.

The four fibre-optic cable shunting rings integrated into the front permit optimum management of up to 48 fibres.

To accommodate large quantities of cables. Shunting ring for side attachment to 482.6 mm (19″) sections and mounting frames in 800 mm wide network enclosures. The ring is attached asymmetrically providing approx. 110 mm free space in front of the 482.6 mm (19″) level. This allows even large quantities of cables to be effectively managed.